0800 136 481 Freephone even from a mobile.
E.Mail us at: firstname.lastname@example.org
The Number "ONE" N6 Hornsey Deadlock Fitting Service of North London.
LOOKING AT THIS PAGE ON YOUR MOBILE AND WOULD LIKE TO CONTACT US?
CLICK ON DIRECT LINK BELOW FOR OUR OFFICE
A Deadlock or deadbolt, is a lock that operates using a key or turn knob. When the key or knob is turned it activates a deadbolt that locates into a door frame keep and keeps the door shut, the only way to open it, from the outside, is with a key.
A mortice lock is a lock that is fitted in to a hole in the side of a door, the word mortice refers to the hole in the door in which the lock is fitted. These types of locks are most commonly found on wooden doors and are more popular in the UK and Europe. A mortice lock is often referred to as a ‘Chubb’ type lock by people in the UK, since Chubb has become the brand leader for this type of lock during the last few decades.
Mortice locks can be deadlocks or sashlocks (sashlocks incorporate a handle and latch mechanism, normally found on back doors) and can be divided in to 2 categories:
Our fully qualified N6 Hornsey Deadlock Fitting Locksmith and Carpenters of The London Lock Fitting Service are available to fit any lock for you, inclusive of Dead Locks and Rim locks to all types of door.
They can be contacted through our office on telephone number:-
0208 800 3792
Lever Mortice Locks and Cylinder Mortice Locks
Lever Mortice Locks
These locks are the most common type of mortice locks fitted to domestic properties in the UK, the majority of lever mortice locks are very similar in their workings. A key is inserted in to the lock which when turned will lift levers to the correct height enabling the bolt to be locked and unlocked.
Lever Mortice locks can have a different number of levers depending on the application and thickness of doors, generally the more levers that are stacked in the lock case the thicker the lock becomes. More levers means more key differs, so it is less likely that another key will open more than one lock. A lock fitted with 5 levers is also more secure than a lock fitted with 2 levers.
A good way of checking to see if you currently have a British Standard lock fitted, as most insurance companies in the UK now stipulate that any final exit doors are fitted with at least 1 BS3621 lock, is to check for the British Standard kite mark. Which will be stamped on the faceplate of the lock on the edge of the door
Cylinder Mortice Locks
These locks are different to lever locks as a cylinder is used to throw the bolt rather than inserting a key in to the lock. They are more commonly found on commercial premises, although increasingly more people are now having them fitted to their homes as they offer more flexibility with master suites and restricted keys.
Cylinder mortice locks are normally fitted with a euro profile cylinder or an oval profile cylinder, which can be key operated from both sides of the door or can be key operated from one side of the door and locked and unlocked with a thumb turn from the other side.
Here at London Lock Fitting Our N6 Hornsey Deadlock Fitting Locksmiths and Carpenters will supply and fit many different types of manufactures locks, plus we will Pass and Master to your requirements.
Besides our Deadlock and Rim Lock fittings we also offer a vast range of other HOME SECURITY works as listed below.
Besides our N6 Hornsey Deadlock Fitting
We supply and fit:
If you would like an estimate on London Lock Fitting or Lock Change Including our N6 Hornsey Deadlock Fitting Services, please do not hesitate in contacting our office on
0208 800 3792.
We can be contacted on our e.mail address at :-
Where we will be happy to give free advice on any lock problems you may have
Alternatively you can fill in the estimate form below and we will respond with an estimate as soon as possible.